2011-12-23

Remote Shutter Release for Canon Rebel XT, XTi, XSi, XS, T1i, EOS 1000D/450D/400D/350D/300D, Pentax Super/K100D/K110D/ *ist Ds2 / *ist D / *ist Ds / *ist / *ist DL, Samsung GX-20/GX-10/GX-1L GX-1S, + Many More!

New Shutter Release Remote Control Cord for Canon Cameras 

Remote Cord for Canon RS-60E3, 3 Feet (91cm), Black 

It adds greater convenience and ease in many shooting situations 
Easily plug this remote switch into your camera and turn your camera on 
The release button reacts fast and fine. 
Lock the button for long exposures or continuous shooting
Two-stage release button: Halfway pressing for auto-focus, complete pressing for taking pictures. 
*Press it halfway to activate the auto-focus. 
*Press it completely to shoot. Slide to lock. Press and slide it to lock the shutter for Bulb Mode photography. 
Avoid Camera Vibration = Sharper pictures! 
Since you can trigger the shutter without touching the camera body, it can avoid camera vibration, thus resulting in sharper pictures. 
No batteries are needed. 

Compatible with: 
Canon (Replacement for RS-60E3) 
EOS Digital Rebel 
Digital Rebel (aka 300D) 
Rebel T1i (aka 500D) 
Rebel XT (aka 350D) 
Rebel XTi (aka 400D 
Rebel XS (aka 1000D & Kiss F) 
Rebel XSi (aka 450D & Kiss X2) 
EOS Kiss/New Kiss/Kiss 7/Kiss III 
Rebel 2000, Rebel G, Rebel G II, Rebel T1, Rebel T2, Rebel T2i 
ELAN 7, ELAN 7E, ELAN 7N, ELAN II, ELAN IIE, IX LITE 
PowerShot G10/G11 
Pentax (Replacement for CS-205) K10D/K110D/K100D/K20D/K200D/KM 
*ist D/DS/DS2/DL/DL2/K10 
MZ-6, MZ-L, ZX-L 
Hasselblad: H/H1/H2/H2D/H1D 
Contax: 645/Nl/Nx/N/N Digital/LA-50 
Samsung: GX-20 GX-10 GX-1L GX-1 

Specifications: 
Model: RS-60E3 
Qty: 1 piece 
Length of cord: 91 cm ( 3 ft. approx. ) 
Shutter release button: Dual Stage Button (halfway / complete) 
Button lock: Available, Slide Style 
Accessory ONLY, camera not included


Remote Shutter Release for Canon Rebel XT, XTi, XSi, XS, T1i, EOS 1000D/450D/400D/350D/300D, Pentax Super 




This shutter release does exactly what it is intended for. I am using it with a Canon XSi, and there are no problems of any kind. The cord is about 4ft, which is plenty long for pretty much any situation I would be in. Feels solidly constructed, and looks clean too!

This remote switch is a bit tricky at first. When I first used it most of the time I it would snap a shot immediately after focusing with a half press, rather than just auto-focus as it should. After playing around for a while I realized if you press the very bottom of the button you get a much better half-press auto-focus than pressing the button in the middle as you are used to. The cable itself is much thicker than the Canon brand, not a problem though. I bought this for my Canon EOS Rebel XT.



No comments:

Post a Comment